New WebPanel Kiosk for Homey is out on Google Play: your tablet as a wall panel, added to Homey like a device. See it →
Panels

An app for Homey Pro

ESPanel

Your smart home at your fingertips, right on the wall

ESPanel turns the 4-inch Guition ESP32-S3-4848S040 touch display into a wall panel for your home. Your lights, sockets, curtains, thermostats, sensors and the electricity price as tiles, with Spotify, the alarm keypad and the family's checklists one swipe away.

· Homey Pro 12.0 or later · 62 Flow cards · English and Swedish

ESPanel on the 4-inch display: a thermostat, a lock, a lamp, a temperature and the electricity price

What you can do

Everything on the display is set up in the Homey app: no YAML, no MQTT broker to run, no firmware to build.

Your home in tiles

Pick the devices for each page and a grid from 1 × 1 to 4 × 4. Tap a tile to switch it, swipe to the next page.

  • Lights, sockets, curtains and blinds, locks, sensors and speakers
  • Thermostats, heat pumps and floor heating with the temperature and the target
  • Tibber and other electricity prices, green to red by today's level
  • Buttons for robot vacuums and Worx Landroid mowers
  • Moods and room lights, Flow buttons, weather, a clock, news and notes
Tiles for a lamp, a lock, a speaker, the electricity price and a temperature A robot vacuum and a lawn mower with their buttons

Four styles, dark or light

Crisp, Cards, Homey and Colorful, each in a dark or a light theme, with an accent colour of your choice. Tiles can take a look of their own: a counter for a thermostat, a graph with its history, a gauge, or what a speaker is playing. Pick the value a tile shows, and find every metered device in the Energy tab.

The Crisp style The Cards style with bigger tiles

Your colours, your sizes New

In the Colorful style, every tile can have a colour of its own: one of twelve ready gradients, or any colour you pick. Colour lights show in the light's own colour while they are on, and white lamps in their warm or cool white. Set it on the website, with a preview of the display.

  • A text size per tile: the value a size smaller, or larger where the tile has room
  • Pick the value a device tile shows, such as one phase of a power meter
  • Gauges: a battery, solar power or power use as a gauge, with its own range and colours
  • Your own light colours: 2 to 6 whites and colours instead of the four white tones; a lamp that can only do white gets the nearest white New
  • Highlight a tile from a Flow: steady, flashing or glowing, for as many minutes as you like, in a list colour or your own New
The Colorful style with tiles in their own colours, a colour light in its purple and a lamp in its warm white A tile's Colour and Text size on the website

Hold a tile for more

Hold a lamp to set its brightness and white tone: Daylight, Neutral, Warm or Cozy, for WLED strips too. Hold a thermostat to set its target, or any tile to see all its values.

A lamp's brightness and four white tones Setting a thermostat's target

Music

A Music page for Spotify, with your own free Spotify app: what is playing with its cover, your playlists, the speaker to play on, and the volume.

The Music page playing a song Picking a playlist

The Heimdall alarm on the wall

An alarm tile in the colour of the mode, and a keypad that arms and disarms with your Heimdall code. Heimdall checks the code and logs who did what.

  • Arm later: a timer on the keypad
  • The display locked to the keypad while the alarm is on
  • The keypads blocked for a while after too many wrong codes
The alarm keypad, with the code being entered

Weekly checklists

A list for each person, with tasks for every day and for each weekday, ticked off on a Checklist tile. A new day starts unticked, and when everything is done Dashy gets heart eyes. Flows hear about each tick and each finished list.

Two checklists, with tasks left for today A finished checklist, and Dashy with heart eyes

Meet Dashy

The eyes widget blinks and looks around, with cat ears that can be turned off. Tap it for one of nine faces, from heart eyes to a sleepy “z Z”. As a screensaver it pulls a new face every 20 seconds.

Dashy's faces Dashy as the screensaver, with the time

A screensaver, and quiet nights

When nobody uses the display it shows an analog, digital or stacked clock, or Dashy, or it turns the screen off, dimmed as you like. Night mode keeps it dark at night; a touch wakes it. Each display can wait its own time before it starts.

The analog clock The digital clock

Set it up your way

The tiles, the screensaver and the look are set in the app's settings in Homey. One button opens the rest on a website for your computer: a drag-and-drop editor for the pages, tile looks, the checklists, Spotify and the alarm.

Setting up the weekly checklists on the website

Your Flows on the display

Show a message with an icon, over a camera image, or until someone taps it. Count down, ask a yes/no question and wait for the answer, highlight a tile or light up a dot in a corner. On one display or on all at once.

See all 62 Flow cards

Specifications

Homey
Homey Pro, version 12.0 or later
Display
Guition ESP32-S3-4848S040, 4 inches, 480 × 480 pixels, touch. Only this display is supported.
Firmware
openHASP, free and open source, installed from Chrome or Edge with a USB-C data cable
Connection
Wi-Fi to your Homey Pro. ESPanel has its own MQTT server, so nothing else is needed.
Pages
One screen each, with a grid from 1 × 1 to 4 × 4 of your choice
Tiles
Lights, sockets, curtains, blinds, thermostats, heat pumps, floor heating, sensors, locks, speakers, robot vacuums, mowers, electricity prices, moods, Flow buttons, weather, clock, news, notes, checklists and Dashy
Looks
Crisp, Cards, Homey and Colorful; dark, light or automatic; your accent colour; a colour and a text size per tile
Music
Spotify, with your own free Spotify app
Alarm
Heimdall: mode tile, keypad, arm later, lockdown while armed
Screensaver
Analog, digital or stacked clock, Dashy, screen off or always on; night mode
Flow cards
17 triggers, 7 conditions and 38 actions
Languages
English and Swedish
Price
Free
Version

Flows

Every card ESPanel adds to Homey's Flow editor, read from the app itself. The cards for all displays at once need no device.

When… Triggers 17

All displays at once No device needed

A countdown finished on all displays

From "Show a countdown". The display has no speaker, so play a sound on another device here. Shows on every ESPanel display that is online, no device needed.

TagsMessage

Someone answered yes to Open the front door?

Fires when ✓ is tapped on a question from "Ask a yes/no question" (under Then). The question must be the same text (case doesn't matter). Shows on every ESPanel display that is online, no device needed.

Someone answered no to Open the front door?

Fires when ✕ is tapped on a question from "Ask a yes/no question" (under Then). The question must be the same text (case doesn't matter). Shows on every ESPanel display that is online, no device needed.

Anyone finished today's checklist

The last task of the day ticked off. Set the checklists up under Checklists on the ESPanel website.

TagsPerson

Anyone ticked off a task

On today's checklist, on a display or by a Flow. Set the checklists up under Checklists on the ESPanel website.

TagsTaskPersonLeft today

ESPanel Display Pick the device in the card

Page changed

TagsPagePage title

Movie night was pressed

Add Flow buttons to the display in Apps → ESPanel → Configure: tap + on a page, then Widgets → Flow button.

TagsButton

Someone touched the display

The first touch after the display has been idle or untouched for 30 seconds, so it works like a presence sensor without firing for every tap.

The screen State

Because nobody has used the display for the time under Screensaver in ESPanel's settings, or its own "Screensaver after".

The display went offline

After a minute without contact, so a restart doesn't count. Check its power and Wi-Fi.

The display came back online

After "The display went offline".

A countdown finished

From "Show a countdown". The display has no speaker, so play a sound on another device here.

TagsMessage

Someone answered yes to Open the front door?

Fires when ✓ is tapped on a question from "Ask a yes/no question" (under Then). The question must be the same text (case doesn't matter).

Someone answered no to Open the front door?

Fires when ✕ is tapped on a question from "Ask a yes/no question" (under Then). The question must be the same text (case doesn't matter).

A code was accepted on the alarm keypad

Heimdall accepted the code and changed the mode. Heimdall's own Flow cards and log tell who it was.

TagsNew mode

A wrong code was entered on the alarm keypad

TagsWrong codes in a row

The alarm keypads were blocked after wrong codes

After too many wrong codes in a row (ESPanel's advanced settings → Alarm), every display's keypad is blocked for a while.

TagsBlocked for (seconds)

And… Conditions 7

All displays at once No device needed

A message is/isn't showing

Any message, question or countdown from a Flow. Shows on every ESPanel display that is online, no device needed.

Person has/hasn't finished today's checklist

Everything on today's list ticked off (also true on a day with nothing on it). Set the checklists up under Checklists on the ESPanel website.

ESPanel Display Pick the device in the card

The screen is/isn't State

Is/Isn't showing page 1

A message is/isn't showing

Any message, question or countdown from a Flow.

The display is/isn't online

The display is/isn't locked by the alarm

Locked: it shows only the alarm keypad, until the alarm is disarmed.

Then… Actions 38

All displays at once No device needed

Ask Pull down the shades? and wait up to 30 seconds

Advanced Flow: shows ✕ and ✓ and waits. Then the "Confirmed" tag is the answer, and "Answered" says whether anyone answered. Shows on every ESPanel display that is online, no device needed.

TagsConfirmedAnswered

Ask Snack time? over Image and wait up to 30 seconds

Advanced Flow: drop an image tag (for example a camera snapshot) on this card. Shows it full screen with ✕ and ✓ and waits; the "Confirmed" tag is the answer. Shows on every ESPanel display that is online, no device needed.

TagsConfirmedAnswered

Ask Snack time? over Image for 30 seconds

Drop an image tag (for example a camera snapshot) on this card. Shows it full screen with ✕ and ✓; the answer starts Flows with "Someone answered yes/no". Shows on every ESPanel display that is online, no device needed.

Ask Pull down the shades? for 30 seconds

Shows ✕ and ✓ on the display. The answer starts Flows with "Someone answered yes/no" (under When) and the same question. Shows on every ESPanel display that is online, no device needed.

Close the message on all displays

Closes whatever message, question or countdown is showing. An open question counts as unanswered. Shows on every ESPanel display that is online, no device needed.

Count down 12 minutes for Pizza

Shows the time left, then "Time's up" until someone taps it. Tapping it earlier cancels it. "A countdown finished" fires at zero. Shows on every ESPanel display that is online, no device needed.

Show Water the plants today for 15 seconds

Shows a notification card on the display. Tap it to close. Shows on every ESPanel display that is online, no device needed.

Show The washing is done with Icon in Colour for 15 seconds

Like "Show a message", with your choice of icon and colour. Shows on every ESPanel display that is online, no device needed.

Show Someone is at the door over Image for 20 seconds

Drop an image tag (for example a camera snapshot) on this card. It is shown full screen. Shows on every ESPanel display that is online, no device needed.

Show Take the bins out with Icon in Colour until tapped

Stays on the display until someone taps it, or a Flow uses "Close the message". Shows on every ESPanel display that is online, no device needed.

Clear today's ticks for Anyone

Everything on today's checklist unticked again (a new day does this by itself).

Tick off Feed the cat for Person

A task on today's checklist, by its text (upper or lower case doesn't matter).

Set the accent colour of all displays to Colour

For example red while the alarm is on. The displays redraw.

Set the theme of all displays to Theme

The same as Theme in Apps → ESPanel → Configure → Appearance; automatic is dark in the evening and night. The displays redraw.

ESPanel Display Pick the device in the card

Show Water the plants today for 15 seconds

Shows a notification card on the display. Tap it to close.

Show The washing is done with Icon in Colour for 15 seconds

Like "Show a message", with your choice of icon and colour.

Show Take the bins out with Icon in Colour until tapped

Stays on the display until someone taps it, or a Flow uses "Close the message".

Show Someone is at the door over Image for 20 seconds

Drop an image tag (for example a camera snapshot) on this card. It is shown full screen.

Count down 12 minutes for Pizza

Shows the time left, then "Time's up" until someone taps it. Tapping it earlier cancels it. "A countdown finished" fires at zero.

Close the message

Closes whatever message, question or countdown is showing. An open question counts as unanswered.

Ask Pull down the shades? for 30 seconds

Shows ✕ and ✓ on the display. The answer starts Flows with "Someone answered yes/no" (under When) and the same question.

Ask Snack time? over Image for 30 seconds

Drop an image tag (for example a camera snapshot) on this card. Shows it full screen with ✕ and ✓; the answer starts Flows with "Someone answered yes/no".

Ask Pull down the shades? and wait up to 30 seconds

Advanced Flow: shows ✕ and ✓ and waits. Then the "Confirmed" tag is the answer, and "Answered" says whether anyone answered.

TagsConfirmedAnswered

Ask Snack time? over Image and wait up to 30 seconds

Advanced Flow: drop an image tag (for example a camera snapshot) on this card. Shows it full screen with ✕ and ✓ and waits; the "Confirmed" tag is the answer.

TagsConfirmedAnswered

Set Electricity price to 1.24 kr with the small text per kWh

For text tiles (Apps → ESPanel → Configure: + on a page, then Widgets → Text tile). The small text is optional.

Highlight Washing machine in Colour, Effect, for until stopped minutes

A thick coloured border on the tile: steady, flashing, or glowing (a slow pulse). With minutes it ends by itself; without, it stays until "Stop highlighting a tile". Also for a text or variable tile, for example yellow while the dishwasher runs and green when it's done.

Highlight Washing machine in #FFB300, Effect, for until stopped minutes

As "Highlight a tile", in any colour: #RRGGBB, for example #FFB300, or a tag with one.

Stop highlighting All tiles

Show a Effect dot in Colour Corner

A small dot in a corner of the screen, on every page, until "Hide an indicator dot". For example: post has arrived, the car is charging.

Hide the dot Corner

Show page 1

Turn the screensaver On or off

The same as "Use the screensaver" in the display's settings. Off keeps the screen on, also at night, for example during a party.

Lock the display

Touches do nothing until "Unlock the display" (child lock, cleaning). Messages and questions from Flows can still be tapped.

Unlock the display

Restart the display

Restarts openHASP on the display. It is back with your tiles in about 15 seconds.

Redraw the display

Show the alarm keypad

To arm or disarm Heimdall with a code, like a tap on the alarm tile.

Close the alarm keypad

Not while the alarm locks the display: then it stays until disarmed.

The ESPanel Display device also has Homey's own cards for its on/off and brightness.

WebPanel
The same, on any tablet: wall dashboards served by Homey
See WebPanel →

What's new in ESPanel

  1. 1.14.1 Current

    Fixed: a big gauge could show only its name and its maximum on the display, without its arc, needle and value. New pictures in the App Store.

  2. 1.14.0

    New: Also show. In a device tile's settings, tick up to three more readings to show small beside its value, such as a thermometer's humidity and battery. Dimmable lights get a brightness slider on every tile bigger than 1x1, in every style (it was only on 2x2 tiles, and not in Colourful). Light colours have their own settings tab. In Colourful, a tile's chosen colour always shows, also while it's off.

  3. 1.13.0

    New: a value font size of your own. In the advanced settings, pick a tile's value size in px or type your own (the display uses its nearest font): only the value changes, not the name, and it stays that size (what doesn't fit is cut at the tile's edge). News tiles can show the headline and its text (Show: Headline and text), such as a school menu's day and its dishes, line by line.

  4. 1.12.2

    Fixed: after an app update or restart, a display that was idle could stay lit without its screensaver until someone touched it. Also: after an app update the displays could stay frozen on their last picture.

  5. 1.12.1

    Fixed: after an app update the displays could stay frozen on their last picture until the app restarted again.

  6. 1.12.0

    New: your own light colours. In the settings (Appearance), choose 2 to 6 swatches, each a white tone or a colour, instead of the four white tones; every lamp gets what it can show (a white-only lamp the nearest white for a colour). Fixed: a touch on the screensaver could switch the tile under it.

  7. 1.11.1

    "Highlight a tile" can glow (a slow pulse) and end by itself after the minutes you give it, and a new card highlights a tile in your own colour (#RRGGBB, or a tag), for example yellow while the dishwasher runs and green when it is done.

  8. 1.11.0

    Crisp: values like "Rörelse" or "12 345 W" stay big on 1x1 tiles. A device can be on a page twice, for example its power and its energy. Sensors with other readings (PM2.5, wind, noise) show their value. Readings are written as in WebPanel (21°, 12 345 W, 48%). Crisp and Colorful have the right icons for motion, power and light, a missing device reads in Colorful light, and Cards shows alarms in your accent colour. Text size is Small, Medium or Large. Texts and guides fixed throughout.

  9. 1.10.1

    Colorful: light tile colours, such as a warm white lamp or Amber, now get dark text so they stay readable, the same as in WebPanel.

  10. 1.10.0

    New: in the Colorful style, give each tile its own colour (12 ready colours or any colour you pick), and colour lights now show in the light's own colour. New: a text size per tile that makes its value a size smaller or larger.

  11. 1.9.0

    Choose what a device tile shows: under Shows in the tile's options on the website, like the status indicator in the Homey app (for example a meter's phase current or energy today); the gauge and chart show it too. The Energy tab lists every device that measures electricity, plugs and thermostats included, and those show their power.

  12. 1.8.1

    Each display can have its own screensaver time: "Screensaver after" in its device settings, or the time from ESPanel's settings as before.

  13. 1.8.0

    Graphs, the electricity price and gauges now show on the display: lines with many points were dropped by the display, and are now sent so it keeps them. Gauges: a reading (a battery, solar power, power use) can be shown as a gauge, with its own range and colours. Devices that only report their battery show its level. Messages from Flows use bigger text when it fits. A graph that cannot load says why. The Timeline tile is gone: Homey does not let apps read its timeline, so it could never show anything.

  14. 1.7.0

    A Timeline tile: Homey's latest notifications on the plate.

  15. 1.6.1

    The electricity price tile showing the next 24 hours: its line no longer runs past the tile's edge.

  16. 1.6.0

    An Electricity price tile (Homey's price with your costs, the spot price or Tibber's; today and tomorrow, or the next 24 hours) and an Energy tab when adding tiles. Graph tiles: any log from Homey's Insights over a day, week or month. Graphs can have Homey's style. Variables can be shown big, in the size and colour you pick. Icons are picked from a grid of the display's own icons, and tiles can be dragged between pages. A tile's size is changed by dragging its corner.

  17. 1.5.0

    Weekly checklists: a list for each person, with tasks for every day and for each weekday, set up on the website and ticked off on a Checklist tile (a new day starts unticked; Dashy gets heart eyes). Flow cards for ticked off and finished. Dashy as a screensaver: it looks around, blinks and pulls a new face every 20 seconds.

  18. 1.4.2

    Meet Dashy, the eyes widget with a new name: cat ears (can be turned off) and nine faces when you tap it, from heart eyes to a sleepy "z Z". Dark eyes in the light theme. In the Cards style the icons are always in colour; the switch shows what is on.

  19. 1.4.1

    Cards tiles with the icon beside the name, the reading in a pill next to the switch, and lone readings big. Thermostats show the room temperature big with a counter for the target. Buttons for robot vacuums and Worx Landroid mowers. Blinds get a switch. Bencho-style charts and eyes that blink; the alarm keypad shows the code as stars again.

  20. 1.4.0

    New: the Cards style from WebPanel, and tile looks: a counter for thermostats, a chart with history, now playing for speakers, an eyes widget, and code boxes on the alarm keypad. Advanced settings on a website with a drag-and-drop editor. Moods and room lights, weather, clock, news and note tiles. The alarm tile is outlined in its mode's colour.

  21. 1.3.3

    Arm later: set a timer on the alarm keypad. A shield icon on the alarm tile, and a link to the support forum.

  22. 1.3.2

    A new look for the alarm keypad, and more reliable updates to the display.

  23. 1.3.1

    The screensaver clock now also shows while the alarm keypad is on screen.

  24. 1.3.0

    New: Heimdall integration.

  25. 1.2.2

    Tibber tiles in the Crisp style are tinted and outlined in the price level's colour. The description and setup guide now say clearly that ESPanel only works with the Guition ESP32-S3-4848S040 display.

  26. 1.2.1

    Swiping to another page no longer switches the tile your finger started on. Bigger tiles (for example in a 2x3 grid) get a bigger icon, name and on/off button in the Homey style. New: a Donate button, and a "buy me a coffee" link in the Guide tab.

  27. 1.2.0

    New: a Music page for Spotify (optional, with your own free Spotify app). New: four white tones when you hold a lamp, also for WLED strips. New: thermostats, heat pumps and floor heating show the temperature; hold the tile to set the target. New: Tibber and other electricity price tiles show the price now, coloured green to red by today's level. New: a screensaver (a clock, screen off or always on) and night mode, set under Screensaver. New: choose a grid from 1x1 to 4x4 for each page; each page is one screen, and the settings show how much memory the display has left. New: a loading screen while the display redraws. Removed: the All rooms page and the Open a room Flow card; the display's own dim and turn-off settings (now under Screensaver). Fixed: the display could freeze when it ran out of memory, and parts of the screen could go missing after a change.

  28. 1.1.0

    New: a Music page for Spotify (optional, with your own free Spotify app): playlists, speakers, cover art and volume. New: four white tones (Daylight, Neutral, Warm, Cozy) when you hold a lamp, also for WLED strips. Removed: the Rooms page. Fixed: the display could freeze and restart when it ran out of memory.

  29. 1.0.0

    First release.